Support Board
Date/Time: Mon, 08 Sep 2025 10:35:24 +0000
Post From: VbP Config
| [2025-09-02 14:49:00] |
| John - SC Support - Posts: 41652 |
|
On the "Tool Configuration" window, the best thing to do is to select the configuration number you want to setup and load that number. By default, the configuration window is set to configuration 1. If you want to setup Configuration 5, then you should select "TC5" in the "Tool Configuration" selection on the "SaveConfig" tab and then select the "Load" button. Then select the Study Collection that you created for the Volume by Price profile in the "Chart Study Collection" entry on the "Settings" Tab and then go back to the "SaveConfig" tab and select the "Save" button. This ensures that you are saving to the correct configuration that you want to setup. The quick select buttons for the different configurations can be used, but you have to be a bit more careful, as it will save the existing configuration and load the new one. This can be confusing, so we recommend using the process we give above. -- We are not sure what you mean by "all lines are empty". For the most reliable, advanced, and zero cost futures order routing, use the Teton service: Sierra Chart Teton Futures Order Routing |